SiboTech Automation Co., Ltd.
  Home Products    News Join us About us Kepware An ISO-9001 Registered Company
UserName: Password:  

SiboTech Automation Products Center

Product List
     Universal Serial/PROFIBUS DP Gateway
     Modbus/PROFIBUS DP Gateway
     Serial/PROFIBUS DP Adaptor
     DeviceNet(Master)/PROFIBUS DP Gateway
     DeviceNet(Slave)/PROFIBUS DP Gateway
     Modbus TCP/PROFIBUS DP Gateway
     SPA to PROFIBUS DP Gateway
     CANopen/PROFIBUS DP Gateway
     PROFIBUS DP/CAN Gateway
     HART / PROFIBUS DP Gateway
     EtherNet IP(Slave)/PROFIBUS DP Gateway
  Industry Ethernet Series
     Modbus TCP/PROFIBUS DP Gateway
     Modbus to Ethernet IP Gateway
     Modbus to Modbus TCP Gateway
     HART to Modbus TCP...
     3-channel HART / Modbus TCP Gateway
     EtherNet IP(Slave)/PROFIBUS DP Gateway
  DeviceNet Series
     Modbus to DeviceNet Gateway
     Modbus to DeviceNet Adapter
     DeviceNet(Master)/PROFIBUS DP Gateway
     DeviceNet(Slave)/PROFIBUS DP Gateway
  CAN/CANopen Series
     CANopen/PROFIBUS DP Gateway
     Modbus(Master)/CANopen Gateway
     Modbus(Master)/CANopen Adaptor
     PROFIBUS DP/CAN Gateway
  HART Series
     HART / PROFIBUS DP Gateway
     HART / Modbus Serial Gateway
     HART to Modbus TCP...
     3-channel HART / Modbus TCP Gateway
   IEC61850 Series
     Modbus/IEC61850 Gateway
  BACnet Series
     Modbus to BACnet IP Gateway
  Embedded Module
     Embedded EtherNet IP Interface...
     Embedded PROFIBUS DP ...
     DeviceNet Chip
  Special Products
     Universal Serial/Modbus Converter (2-Ports)
  SiboTech Software
     Gateway Configuration Software ...
     DNetStart Web Configuration ...
  Our Partners
HART to Modbus TCP Gateway
HART to Modbus TCP
price click click shipping shipping
Product Name: HART to Modbus TCP Gateway
Order Code: HME-615
HME-615 is a Gateway that achieving data communication between HART and MODBUS TCP. HART side can be configured as a primary master or the secondary master. HME-615 act as server at the side of Modbus TCP.
Technical Specification:
  1. HART can be used as a primary master or the secondary master;
  2. Support one HART-channel. Multi-point mode communication, under ideal conditions, the use of an inner sense resistor can connect up to 13 units of the instrument, using an external sense resistor (250Ω) can connect up to 15 units of instruments. Note: The actual maximum number of connections is up to environment, impedance of communication cables, the minimum operating voltage field instruments,communication distance and so on;
  3. HART interface supports single-point mode and multi-point mode;
  4. Single-point mode supports burst operation HART slave device data;
  5. Support all commands of the HART protocol;
  6. Each HART command can be configured for change-of-state output, polling output, initialization output or disable output;
  7. The HART channel supports up to 100 commands, buffer of HART output data is up to 2000 bytes, and buffer of input data is up to 3000 bytes;
  8. Channel can choose to use an inner or external sense resistor;
  9. EtherNet 10/100M adaptive, support IP address conflict detection, automatic routing functions;
  10. Support 36 Modbus TCP connections, and support up to 512 command requests at the same time;
  11. Power: 24VDC (9V~30V), 80mA(24VDC);
  12. Operating temperature: -20℃~60℃, relative humidity 5% ~ 95% (non-condensing);
  13. External dimensions:(Width)40mm*(Height)125mm*(Depth)110mm;
  14. Installation: 35mm DIN RAIL;
  15. Protection Level: IP20.
If you cannot browse PDF file normally,please go to to download reading program .

SiboTech Automation Co., Ltd.
Copyright(c) 2005-2021 All Rights Reserved.
Tel:+86-21-6482 6558 Technical Support Hotline:+86-21-6482 6558 # 6004 Email: footen
XML 地图 | Sitemap 地图